Shocking Alarm SD Card GPS Tracker Fuel Sensor Sleep Entry / Exit Detection

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Shocking Alarm SD Card GPS Tracker Fuel Sensor Sleep Entry / Exit Detection

1. Support SD card, help to store data, help user used for safety | manpower utilization | fleet management | vehicles maintenance | Fuel/Oil management.

2. AT09SD is GPS/GPRS advanced version, with Metal casing, in a small dimension, connect many accessories at the same time : RFID, IButton, camera, 2 temperature sensors, fuel level sensor and other accessories.

3. Real time to get the reports: location, ignition on/off report,idle report, direction and speed, working hours report, fuel consumption report and so on in the tracking software platform.

GPRS and SMS alarm event:

 shocking alarm by 3 axis sensor 
 Digital output cut/resume
 GPS antenna drop/connect
 Digital input activate/disactivate
 GEO fence in/out
 idle speed alarm
 low battery voltage
 Emergency button  
 External power source cut

Firmware Feature: 

 FOTA – Firmware Over the Air 
 Sleep entry/exit detection
 3 operating modes - Normal, Sleep, Deep Sleep 
 GPS aerial cut detection 
 External power cut detection
 GEO fence function with circular/rectangular shape 
 GPS module fault detection 
 Ignition cut detection 
 Internal battery level monitoring and low capacity detection 
 Over speed detection with buzzer audible warning 
 Mass update of Configuration settings via GPRS
 Changeable SMS alarm message for each port (digital input/output)
 Heart beat function to keep TCP connection.
Two way conversation: speaker/microphone 
Temperature monitoring within range Min/Max detection
 Voice Listen-in for authorized ueser

Specifications:

Hardware spec
MCU	STM32F103VCT6 (ARM 32-bit Cortex™-M3 CPU)
Frequency	Quad-band: 850/900/1800/1900Mhz
GPS	uBlox NEO 6M
GSM antenna	External
GPS antenna	External
Inner battery	900mAh polymer battery
Movement Sensor	3-Axis sensor
PIN IO Interface	4 digital input
4 digital output
4 analog input
1 Panic Button
2 1-wire for iButton and temperature probe
8 PIN IO Interface	1 RS232
1 Speaker
1 Microphone
USB port	For upgrade firmware and
debug purpose
(True USB port, not UART to USB)
SIM socket SD slot	1 standard SIM socket, 1 SD card slot
Dimension	93mm*82mm*30mm

 Optional Accessory  

 Camera: take picture and send to server
 fuel sensor: RS232/485 fuel sensor, accuracy is better.
 speaker/microphone: for two way conversation
 Buzzer or LED lamp: to give driver alart
 Relay: For cut off engine remotely
 iButton or RFID: Driver ID/to identify the driver
 door sensor: for the long truck without electronic in back door
 temperature sensor: detect temperature for some specical transport 

Standard Package

 1 x GPS tracker AT09SD device 
 1 x IO cable
 1 x GSM antenna
 1 x GPS antenna

Contact Info

Skype: Frisance
Mobile: +86 15815591051
WhatsApp: +86 15815591051
Email: frisance@totemtek.com

Welcome your customize requirement or OEM/ODM project !