Portable Soldering Iron Ultrasonic Glass Soldering Iron

Ultrasonic Glass Soldering IronGlassGlass surface is smooth, general welding equipment is difficult to weld metal and glass, but the ultrasonic soldering iron welding glass and metal components easily. When the ultrasonic soldering iron welding glass welding point firmly, time is short. Glass ResultsUltrasonic soldering is a flux-less soldering process that uses ultrasonic energy, without the need for chemicals to solder materials, such as glass, ceramics, and composites, hard to solder metals and other sensitive components which cannot be soldered using conventional means.The Effect of Ultrasonic Soldering IronUltrasonic soldering systems offer the advantage of the fluxless soldering of many metals in common use as well as previously difficult to solder materials such as aluminium, ceramics, glass and silicon’s used in microelectronic applications. We can test for free, and give a lot of the best solution, including the production, secondary production, assembly line, and the optimized revamping existing production lines.Glass Soldering Iron Videohttps://youtu.be/APibxqz6pJ0Standard Parameter ModelCS55-X15IMaterialTitaniumFrequency55 KHZMax Power15 WattSoldering time0.01-99.99 SHandle Weight0.3 KgGenerator ModelCS100DIGenerator Size315x312x135mmGenerator BrandCheersonicGenerator N/W7.5KgCable Length3M/5M/10MCustomizedYesIntroduction  Ultrasonic soldering systems, which is rated at 80W and can reach temperatures of up to 450°C, and is fitted with interchangeable screw in copper bits. The ultrasonic transducer is built into the soldering iron handle and the need to prevent this unit being overheated necessitates the continuous use of a cooling air supply.The 40 kHz standard ultrasonic generators are separately housed in a sheet metal case with carrying handle and with soldering iron rest attached to one side. The generator has five levels of power plus a zero power level that allows the soldering iron to be used in the conventional manner. The ultrasonic power is applied to the iron as required by means of a footswitch.