Wholesale Lightweight Casual Shoes Customization Fashion Sport Shoes

Shoe quality evaluation

To identify the quality of shoes, we need to look at the appearance and internal indicators. Since internal indicators often need the help of testing instruments, it is more practical for consumers to judge the quality of shoes from the appearance. From the perspective of appearance, the quality of shoes is mainly judged by the quality and process of materials (including vamp, sole and lining). The size can be measured, and the process is mainly based on visual inspection, touching, pinching and pushing.

upper

The upper is one of the main components of shoes. As for smooth shoes, it depends on whether they are soft and plump. Check whether the surface is loose after pressing the upper by hand. A good upper should be full and soft, comfortable to handle, even luster, and no looseness on the surface. For the upper of suede shoes, pay attention to check whether the fluff is short and uniform, and the color should be consistent. The lining is a part of the upper, which is used to strengthen the upper, prevent the upper from stretching and deformation, and improve the feel of the foot. Therefore, good lining materials (such as leather lining) should have good touch, permeability and moisture removal, and not easy to decolor. When sewing, there should be no wrinkles or fat edges on the shoes.

Insole

Usually, men's shoes use the back half of the insole or heel pad. Women's shoes cover the insole with complete padding. The insole can keep the insole clean, cover the unevenness of the insole, and improve the foot feeling. Therefore, the insole should have good moisture absorption and drainage performance. In terms of workmanship, the insole should be flat on the insole without wrinkles.

Outsole

From the appearance, the bonding state around the outsole should be tight without gaps, and the bottom surface should be flat.

follow

Whether it is a low heel or a high heel, the first thing to see if it is naturally flush with the shoes. For women's shoes with half high heels and above, the following two points are more important: first, the heel should be firmly installed on the insole, without swinging from side to side; Second, the palm surface should not be smaller than the heel surface.

Insole

On the one hand, look at the materials of the insole. It's better to use genuine leather. On the other hand, pressing the waist protector with your hand is equivalent to the part of the instep when wearing shoes. It is better not to move. Under the action of this force, if there is deformation at the opening of the toe cap, it indicates that there is a problem with the quality of the shoe.

stable

Put the shoes on a flat surface, and the shoes should be stationary immediately. Such shoes have good stability, which is one of the basic conditions for high-quality shoes.

Daily cleaning of shoes

1. When the shoes are dirty, you can gently brush them with clean water stained with detergent, and then wash them with clean water. Shoes should be dried in a cool and ventilated place to avoid direct sunlight. Do not use heat or open flame to dry, so as to avoid aging, peeling, fading and serious deformation. Too much direct sunlight, hot air from hair dryer and improper care methods will reduce the service life of shoes; It is not allowed to soak for a long time during washing. Generally, the soaking time shall not exceed 20 minutes. Real leather shoes can't soak in water.

2. The raw materials of sports shoes are mostly synthetic polymer materials (mostly polyester nylon mesh and non-woven synthetic leather, and the soles are mostly rubber or rubber foam materials). Some uppers are leather. Therefore, it is strictly prohibited to contact with organic reagents and oils, and it is not suitable to wear them for a long time under high temperature. Generally, the wearing or washing temperature shall not be higher than 45 ℃.

3. If the shoes are stored for a long time, they should be cleaned first, and then stored in a cool and ventilated place after being dried, so that the shoes can be dried in enough time to avoid mildew. It is better to support leather shoes with paper balls or shoe holders to avoid serious deformation. Keep the toe cap facing down and the sole facing the wall, and dry in a room temperature and ventilated place to prevent water from saturating the foam material of the midsole. (Because the foam material is not easy to dry, it is recommended not to lay the wet shoes flat.)

4. In order to make the sneakers look more beautiful, please do not use a hard brush or use too much force during wearing or brushing, and do not use nails or sharp tools to pick the corners of these printed patterns. After wear and use for a period of time, the surface of some patterns may appear some small cracks (especially the parts that are often bent), which is normal.

5. In order to achieve satisfactory wearing effect, please treat your shoes fairly. Remember not to wear ordinary jogging shoes or walking shoes for strenuous sports, such as football.

6. Athletes who train every day should prepare more than two pairs of sports shoes for daily replacement.

7. Athletes or sports enthusiasts should always wear sports shoes. In order to prolong the service life of shoes, wash them as little as possible.

8. Nylon mesh and artificial leather on running shoes are relatively easy to maintain and can be cleaned by sailors. It is better not to use the washing machine or soak in water.

9. Clean shoes and shoelaces separately with neutral soap/washing water. When washing shoes, take out the insole, gently brush it with a soft bristle brush, and finally rinse it.