Hot Sell Eraser Sneaker Cleaning Kit for Wood Shoe Brush

The frosted leather is usually wear-resistant, so you can use a common shoe brush. If it is a frosted leather that is easy to fluff, you should choose a bristle or a soft pp plastic wire shoe brush.

usage method

1. Lightly brush the entire shoe with a large shoe brush to see if the protruding part of the shoe edge is contaminated with dirt.

2. Use small shoes to brush away dirt and fine dust on the concave and convex parts such as the shoe edge or joint.

3. Loosen the shoelace, and then brush away the dirt that is not easy to see from the outside.

4. Squeeze a little cleaning oil on the cloth and coat the whole shoe. At this time, the most important thing is to thoroughly remove the old shoe oil left on the shoe

Clean.

5. Take another piece of cloth (not to be mixed with the cloth using cleaning oil), dip a little shoe polish on it, and coat the whole shoe. The amount of shoe polish is about the size of the little finger.

6. After coating the whole shoe, polish the whole shoe with a clean soft cloth. The details should not be sloppy.

7. Finally spray waterproof fog. The waterproof fog can not only prevent the shoes from being attacked by water, but also has the effect of not easily contaminated with dirt. After the waterproof fog is dry, put the last into the shoe.

Bristle brush wire: rigid and flexible, not easy to deform, resistant to moisture, not affected by heat and cold. The brush wire made of bristle is moderately soft and tough, and will not scratch the shoe brush wire. It is a very good brush wire material.

PP plastic brush wire: PP material has excellent moisture resistance, acid and alkali corrosion resistance, solubility resistance, almost no water absorption, and has no effect when contacting with most chemicals. The brush wire made of PP material is cheap and practical, and widely used. The disadvantage is that it becomes brittle at low temperature and is not wear-resistant and easy to age.