Radio Frequency Fractional CO2 Laser Machine Far-infrared For Syringoma Removal Harmless

Delivery Time:within 3-7 working days upon receipt of payment
Certification:Medical CE, ISO13485.free sales certification, etc

Radio Frequency Fractional CO2 Laser Machine Far-infrared For Syringoma Removal Harmless

I.Theory

Unlike traditional laser, fractional laser will only cover part of the skin tissue, leaving the surrounding tissue intact, and then cause a series biochemical reactions inside the skin, thus to reach the results of skin lifting & resurfacing, pigments and scar removal, etc, finally let the skin return to young again. The unaffected areas act as a reservoir for more effective and rapid tissue healing and collagen production, thus lift the skin and removes speckles and pigments.

a)     Red areas are the zones of ablation in fully ablative standard resurfacing, which need longer healing time;

b)     Red areas are the microscopic treatment zones (MTZs) of fractional photothermplysis (FP) and the blue areas are the bridge of intact, unaltered skin which will stimulate collagen production, thus faster recovery as well as enhance effective.

c)     White dots are fractional laser on skin.

II.Applications:

       1.    Skin renewing and resurfacing

 2.    Wrinkle removal, skin tightening

3.    Acne and acne scar removal

4.    Smooth burnt scars and surgery scars, etc

 5.    Remove intractable chloasmas and pigmentation

 6.    Sun damage recovery

III. Features:

1.Radio frequency co2 fractional laser

2. Individual design of laser structure, greatly facility laser replacement and easy daily manintenace

3. Display: 8.4\" color touch LCD screen

4. Humanized software control, stable laser output, more safety

5. Smart articular arm, high accuracy

6. Excellent performance, not affect people\'s normal life and study

7. Packing: aluminum alloy case

IV. Parameters:

Basic Specification
Wavelength	10.6μm, far-infrared laser
Display	LCD 5.6inch
Pulse Frequency	33.3 Hz
Duration	0.1-10 ms
Distance	0.1-2.6 mm
Interval	0-6s
Repeat	1-5000 ms
Overlap	1-20 times
Average Power	30W
Working Mode	Continuous pulse, single pulse, interval pulse
Scan Graphics	Oval, Linear, Rectangle, Square, Triangle, Hexagon, and Round.
Dot Quantity	400 dots at most
Working State	Hyper-pulsed mode
Scan mode	Random, Sequence, and the Maximum Distance
Pulse Energy	10mj to 130mj is optional for each dot
Penetrability	5-6mm
Technical Specification
Condenser Focus	F=50mm
Beam divergence angle	0.3mrad
Spot Size	0.2mm
Aiming Beam	Less than 2Mw, 635nm red semiconductor laser
Cooling System	Closed Loop Circulating Water + Air
Environment Temperature	5-40°C
Relative Humidity	<80%
Temperature in Transit