Broken Hand Splint CE FDA Special Care Orthopedic Polyester Fiberglass For Medical

CE FDA Special Care Orthopedic Polyester Fiberglass Casting Splint For Medical

Description

Orthopedic splint is composed by manifold layers of orthopedic casting tapes and specially nonwoven fabric . Tt is characterize by better viscosity , fast drying time , high rigidness and light weight . Dure to better biocompatibility , polyurethane is widely used in medical fields . Animal study and acute and chronic toxicity test have proved that medical polyurethane is non-toxic and no teratogenecity , no local irritation and no anaphylactic reaction .

Features

1.  Polyester net cloth fiber material are available .

2.  Extra Strong : at least 20 times stronger than traditional plaster bandages .

3.  Good ventilation : 200 times rate of breath than traditional plaster bandages . 

                                 Skin can be breathed freely and keep bacterial from reproducing .

4.  100% permeable to X-ray , allowing subsequent X-ray photography without unwrapping and thus              saving expenses for patients .

5.  Easy to use : short immersion time , easy to shape , fast setting time .

7.  Term of validity : 3 years .  

Advantage

1)  Simple operation : Room temperature operation , short time , good molding feature

2)  High hardness & light weight 20 times hard than plaster splint ; light material and use less than         plaster splint ;

     Its weight is plasters 1 / 5 and its width is plasters 1 / 3 , which could reduce wound burden

3)  lacunary ( many holes structure ) for excellent ventilation

     Unique knitted net structure make sure good air ventilation and prevent skin damp and hot & pruritus .

4)  Rapid ossification ( concretion )

      It ossifies in 3 - 5 minutes after open the package and could bear weight after 20 minutes , But plaster       splint need 24 hours for full concretion

5)  Excellent X-ray penetration

      Good x-ray penetration ability makes X-ray photo clearly without remove the bandage ,  but plaster          bandage need remove to make x-ray inspection .

6)  Good waterproofing quality

     The moisture - absorbed percent is 85 % less than plaster splint , Even the patient touch the water            situation , it still could keep dry in the injury position

7)  Convenient operation & mold easily .

8)  Comfortable & safe to patient / doctor

    Material is friendly to operator and it wont become tension after concretion.

9)  Wide application

10)  Environment friendly

       Material are environmental friendly , which could not produce polluted gas after inflammation .

Usage

1)  Select proper specification according to the surgery position .

2)  Put the pad ( cotton coil or cotton slipcover ) on the surgery position .

3)  Immerse the roll in room temperature water ( 21°C - 24°C ) for 4-6 seconds and squeeze it 2 - 3 times firmly . If the water warmer than 21 °C - 24°C shortens the immersing time , while cooler than 21°C - 24°C water lengthens the time .

4) Take the splint out and press out excrescent water ; Absorb water drip of the splint surface with towel .

5)  Put the splint on the fixed position, molding it according to need . Mold it in 3-5 minutes after immersing in water because after that time it will concretion . Allow about 10 minutes for sufficient concretion and let patients not move during this time . It could bear electric weight after 20 minutes .

6) Fix the splint with gauze bandage or elastic bandage after concretion .

Sample Policy :

1. Sample according to your design drawing . Sampling time :3 - 5 days .

2. Design your own sample , then remake it .

3. Existing Samples Sampling time  : 1day

4. Make mass production after your confirm the sample .

Quality Control :

1. We will not start to make the products until you confirm the sample .

2. The packing will be water-proof , damp-proof and sealed 

Our Advantage : 

1. CE, ISO13485 certification  .

2. On