High Quality Folding Lock Bicycle Lock Anti-Theft Lock Mountain Bike Lock

The bicycle chain lock body is made of aluminum alloy, which is cylindrical, with a diameter of about 25 mm and a length of about 5 cm. The lock core is made of copper and installed in the central part of the lock body. This lock is connected to an iron chain with a thickness of about 6 mm at one end of the plane of the lock body. The whole iron chain is wrapped by plastic hose, and the length of the chain is about one foot eight inches. The other end of the chain is connected with a steel lock stud head. There is a circular groove around the lock cylinder head. There is a round hole on the plane at the other end of the lock body, that is, the lock column hole, which just fits the lock column head. There is a lock pin connected with the lock core in the round hole.

When the lock needs to be opened, insert the key into the lock core and turn it clockwise. The rotation angle is limited by the lock core positioning slot. The eccentric shaft behind the lock core rotates in the small rectangular hole on the side of the lock, and the eccentric shaft drives the lock to move upwards {the eccentric shaft and the rectangular hole cooperate to turn the rotation into movement}. The lock moves upward against the pull of the small tension spring under the restriction of the guide plate. When the key is turned to a certain angle, the lock is lifted out of the lock ring tail slot, and the lock ring retracts rapidly into the lock box under the action of the large tension spring, until the lock is opened when the wrench touches the positioning block. After the lock ring is retracted, the lock lock is blocked by the lock ring and cannot fall back to its original position. The lock core is also restricted by the lock lock lock to the position after rotation. The key is stuck by the round bullet in the key tooth and cannot be pulled out of the lock core.