New Technology Machine Gypsum Plaster Powder Plant Making Machine

Installation and commissioning of gypsum powder machine

1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.

2. During installation, attention should be paid to the vertical position of the main body and the horizontal.

3. After installation, check whether the bolts in each part are loose and whether the main engine compartment door is fastened. If so, please tighten it.

4. Configure the power cord and control switch according to the power of the device.

5. After the inspection is completed, conduct a no-load test run, and production can proceed once the test run is normal.

In the gypsum board industry, the DSJ series gypsum powder machine can break up and throw desulfurization gypsum slag cakes with a moisture content of ≤ 12% through the rotor of the gypsum powder machine, and fully exchange heat with the introduced 550 ℃ hot air to form materials with a moisture content of ≤ 1%. The materials enter the rising pipeline from the outlet duct and are carried away by the hot air into the next process. The DSJ series gypsum powder machine can also be used for drying and crushing of filter cakes in the cement industry and carbide slag in the environmental protection field. Feed particle size of DSJ series gypsum powder machine: ≤ 100mm, production capacity: 30-160t/h