Factory Wholesale Geocell/Cement Blanket/Plastic Product/Wall Protection Systems for Highway Subgrade Reinforcement

Biaxially stretched plastic geogrids are made from polypropylene (PP) or polyethylene (PE) as raw materials through plasticization, extrusion of sheets, punching, heating, longitudinal and transverse stretching. The effectiveness of using bidirectional geogrids is closely related to the treatment of the paved road surface. Before paving, it is necessary to thoroughly clean substances on the road surface that may affect the bonding strength between the geogrid and the underlying layer, such as grease, paint, sealing materials, water stains, dirt, etc., to ensure that the paving surface is clean and dry. Excavate the foundation bed, set up a sand cushion layer (with a height difference of no more than 10cm), roll it into a platform, lay a grid, and the longitudinal axis should be consistent with the main force direction. The longitudinal overlap should be 15-20cm, and the transverse overlap should be 10cm. Use plastic tape to tie and overlap. When laying the grid, fix it on the ground with U-shaped nails every 1.5-2m. The laid geogrid should be backfilled in a timely manner, and the number of layers should be determined according to technical requirements.

The main characteristic of unidirectional PP geogrid is unidirectional tension, which has high tensile strength and modulus, and is suitable for engineering that needs to enhance the unidirectional stability of soil. In road construction, it can be used for roadbed reinforcement, pavement crack prevention, and other aspects; In slope engineering, it can effectively prevent slope landslides and collapses.

The bidirectional PP geogrid forms a grid like structure through bidirectional stretching, and has good tensile strength and rigidity in both vertical and horizontal directions. This type of grille is suitable for projects that require comprehensive reinforcement, such as road and railway subgrade reinforcement, embankment, retaining wall and other infrastructure construction. The connection method of hot melt welding also improves construction efficiency and overall stability of the project.

The three-dimensional PP geogrid has a three-dimensional structure, higher stiffness and strength, and can more effectively disperse and withstand soil loads. In soil reinforcement and protection engineering, three-dimensional geogrids can significantly enhance the tensile and shear strength of soil, prevent lateral displacement and settlement of soil. It is widely used in fields such as roads, railways, water conservancy, and environmental engineering.