0.18mm China PE raw material flat emmiter drip tape for agricultural farmland irrigation

Discription:

Dripper/emitter---inlay in drip tape,it is moulded through injection molding in one,with its own filtering

section,and has new-style wide&long flow channel,good performance of anti-clogging.

Drip tape/pipe is made of high quality of raw material purchased from PetroChina and Sinopec.

Fully turbulent flows in the channel,uniform outlet,flow rate different is less than 5%.

Anti-corrosion,anti-aging.

Dripper is integrated with drip tape,install and use conveniently,small pressure,high irrigation

precision.Small frictional head loss,long lateral laying length.

Light weight,easy layout and collection.

Production ability:15*40’HQ containers per month.

Widely be applied to sugarcane, fruiter,tea,floriculture,big field row crops,greenhouse,windbreak..

1,Water-saving;

Duly watering according to demand of crop,water is delivered through pipeline completely,humid region

is only the soil near the root of crops.There is no movement for water in the air,no wet on the leaves

surface,also no evaporation outside the effective wet area,therefore the loss of irrigation water is reduced markedly.

2,Fertilizer-saving;

It is very convenient to fertilize if combining with irrigation.That is to pour the dissolved chemical fertilizer

into irrigation system,combine the chemical fertilizer with irrigation water,so fertilizer nutrient is applied to the root of crops directly and evenly.As it is only small part of area control,less leakage of water and fertilizer,consumption of chemical fertilizer is saved and pollution reduction.

3,Labor-saving;

Drip irrigation system is controlled by valves manually or automatically,and combination with fertilizing,

therefore the input cost of labors is saved;And micro-irrigation is for small part near the root,most of land

surface keeps dry,weeds is reduced,this makes less cost on herbicide and labor on weeding;Fertilizer and

pesticide together with irrigation water is conveyed to the soil near the root through drip tapes,without human operation.

4,Energy-saving;

Working pressure of drip irrigation emmiters is 50~300Kpa,much lower than sprinkling irrigation,thus

it saves water compared with land surface irrigation,so drip irrigation reduces the consumption of energy.

5,Pest-reducing through controlling temperature&humidity on the land surface;

The large amount of irrigation water is for traditional furrow irrigation in greenhouse,the land

surface keeps wet in a long time.This causes quick fall of land temperature quickly and slow rise,

evaporation increasing,very high humidity inside of greenhouse,then it results in pest and disease attack.

As drip irrigation is localized wet,high of soil keeps dry on the land surface.To adopt drip

irrigation under plastic film,that is to lay drip tapes under plastic film,it will be better results.

6,Soil conservation,NO scour and compaction;

Because of large water amount in a traditional way of border&ditch irrigation,it is too much scour and compaction, leads to reduction of soil aeration,the soil is easy to become hardened badly if no

subsoiling in time. Drip irrigation belongs to micro-irrigation,the water drip into soil slowly and evenly,

it has an protection effect for the soil,and forms a well environment of water,fertilizer,heat.

7,Increasing both production and income;

Drip irrigation can supply water and fertilization for crop root duly in appropriate amount,and create

good environment of water&heat&air&nutrient for the soil of crop root zone,so high&stable yield achievable.

8,Strong adaptability to edaphic,effectively in any difficult terrain condition.

The drip irrigation deliver the water to the soil near each crop through adopting pressure pipeline,it works effectively in any difficult terrain condition.

OEM Service

Different brand and packing design as you need.Different languages in your courntry and market is wlcomed