100lb Red UHMWPE Braided Wire Jiging Assist Line Cord

100lb Red UHMWPE Braided Wire Jiging Assist Line Cord

The origin of jigging assist line varivas earliest from Japan. They invented a variety of assist line, maguro assist line, tug assist line, and so on. SOVETL has researching assist line from 2014s. Nowadays, we have developed sundry assist line according to different function and breaking force. Red UHMWPE+stainless wire assist line is the most hot-sale of our company. 

Key Features

• High tensile strength

• Low elongation to break

• High modulus (structural rigidity)

• Low electrical conductivity

• High chemical resistance

• Low thermal shrinkage

• High toughness (work-to-break)

• Excellent dimensional stability

• High cut resistance

• Flame resistant, self-extinguishing

• For branch line use

• High LASE (load at specified elongation)

As the old saying in china goes, Give a man a fish, and you feed him for a day; Teach a man to fish, and you got rid of feeding him for a lifetime. So we will teach you to how to tie assist line.

• Step 1: Circle assist line in the thumb or index finger around 2 to 3 laps.

• Step 2: Pass through top of the line from the middle.

• Step 3: Side to see this knot, then from the hole to pass through the hook.

• Step 4: Put the hook into the middle.

• Step 5: Tighten the line, to pull as tightest as possible.

• Step 6: It is very important that the thread leads from the hook door to the hook handle.

• Step 7: See the joint from another angle.

• Step 8: The other end of the line is tied in the same way.

• Step 9: Put on the heat shrink tube, then heat up.

• Step 10: Successful!!!

• Step 11: Tied to the iron plate, the best state is, two hooks scattered, respectively, in the third place of the iron plate.

As I said, assist line can be coustomized according to various functions, color and breaking strength you prefer.

If you have any good ideas about our products, please contact us.