2013.07V BMW E/F SCANNER for bBMW OBD2 Diagnostic Scanner and Mileage Correction

BMW E/F SCANNER

Reasons To Get BMW E/F Scanner

1.166 types of ECU supported

2. Software Version: 2013.07

Notice: 

1. Language: English

2. Operating System: Windows XP

3. Please do not upgrade it online, otherwise your BMW E/F SCANNER will be locked! And need send it back for repair

4. There is dongle in the package. Each dongle has the serial number, only can be used the same hardware in the package.

5. Instrument Cluster and CAS1-CAS4 Must Be Adjusted Manually

software system which allows to read,decode and edit ISN password (It is sync password  betweenECU and immobilizer ) Correct checksum also calculated automatically

BMW E/F SCANNER Supported Model List:

1-series (E81, E82, E87, E88), 2003+

3-series (E90, E91, E92, E93), 2004+

5-series (E60), 2002-2010

5-series (F10), 2010+

5-series “Gran Turismo” (F07), 2009+

7-series (E65, E66), 2000-2008

7-series (F01, F02), 2007+

BMW X5 (E70), 2006+

BMW X6 (E71), 2007+

Mini Cooper (R56, R57), 2005+

Rolls-Royce, 2003+

 
BMW E/F SCANNER List of Supported ECU:

1) Drive – 6 categories / 30 types; CAS, DME, EGS, EKPM, GWS, VTG

2) Chassis – 12 categories / 15 types; ASR, CIM, DSC, EDC, EDCSHL, EDCSHR, EDCSVL, EDCSVR, EHC, EMF, RDC, VDM

3) Body – 65 categories / 121 types; AHM, AMP, BFH, BFS, BZM, CCC, CDC, CHAMP, CIC, CID, DWA, ECL, FAH, FAS, FLA, FOMO, FRM, FZD, HKL, HUD, IHKA, JBBF, KBM, KGM, KOMBI, LMA, MASK, MMC, MMI, MPM, PDC, PGS, RAD, RFK, RLS, RSE, SASL, SASR, SBSL, SBSR, SD, SECUR, SFZ, SGM, SHD, SHZH, SIM, SSBF,SSFA, SSH, STVL, STVR, SZL, SZM, TEBF, TEFA, TEL, TMB, TMBH, TMF, TMFH, VID, WIM, ZBE, ZGM

 
System Capabilities:

DTC reading with clear text explanation, car setting adjustment, maintenance interval adjustment, key

programming or blocking, remote control synchronization and much much more!

1. Diagnosis and interpretation of error codes

2. Reading and adjustment of run hours and maintenance intervals for: Oil, Filters, Brake pads, Spark plugs, Liquids, Inspections and services as well as СО, СН inspections etc.

3. Adjustment of mileage and maintenance intervals

4. Change/Adjust FA code (currently in test mode)

5. CPU CODING

6. Read/Write RAM/FLASH/EEPROM *

7. Read/Write ISN (marriage CAS and DME/DDE) *

8. ELV Reset (steering wheel lock)

9. Key read/write via OBD2 in CAS2, CAS3, CAS3+

10. Key prog module for E/F-series

11. Learning key or transponder directly in the ignition lock!

12. Lost keys blocking/unblocking

13. Mileage correction module for E/F-series

14. Change AIF (indexes of programming)*

15. Reading the last saved mileage from ECU VIN change *

16. New battery registration

 
Tech Tip:

Procedure of used ECU installation in car with automatic transmission:

Install used DME/DDE

Switch ignition ON.

Connect BMW explorer,and run Quick test.

Go to EGS ,press Unlock EWS

Got to DME/DDE and read ISN

Switch ignition OFF,connect to CAS,write down old ISN,write ISN previously read from DME/DDE and save it.

Switch ignition ON

Go to DME/DDE and make synchronization procedure.

BMW E/F SCANNER Software Display: