High Quality Transmission Parts Hardened Tooth Sprockets

The new sprocket is too long or stretched after use, which is difficult to adjust. The chain link can be removed according to the situation, but it must be an even number. The chain link should pass through the back of the sprocket, the locking tab should be inserted outside, and the opening of the locking tab should face the opposite direction of rotation. The sprocket should be filled with lubricating oil in time during operation. The lubricating oil must enter the fit clearance between the roller and the inner sleeve to improve the working conditions and reduce wear.

Sprocket is one of the important parts of the scraper conveyor. Its characteristics have a direct impact on the service life of the scraper conveyor. The sprocket drive used in the sprocket wear analysis is the ordinary traction sprocket, which has relatively large sliding motion at the engagement, and the working conditions are poor, which will cause serious wear.