High Quality Flat Aluminum Heat Pipe for Electric Device Cooling

The water pipe shall be firmly bound with the reinforcement framework or erected reinforcement to prevent water blockage or leakage due to deformation or joint detachment of the water pipe during concrete pouring. After the installation of the water pipe network, connect the inlet and outlet pipe orifices with the inlet and outlet main pipes and water pumps for a water connection test. The water pipes are required to be smooth and free of water leakage.

The cooling water pipe adopts a wall thickness of 2mm and a diameter of φ 30mm thin walled steel pipe. The 3.5m thick cushion cap is vertically arranged with two layers of water pipe network, with a horizontal spacing of 1.0m and a vertical spacing of 1m. The distances from the upper layer network to the top surface of the cushion cap and from the lower layer network to the bottom surface of the cushion cap are both 1.25m; A layer of water pipe network is vertically arranged on the 2.5m thick cushion cap, and the water pipe network is vertically arranged in the center of the cushion cap; The vertical inlet and outlet of each layer of water pipes shall be staggered by 1.5m from each other. The water inlet and outlet shall lead out of the concrete surface for more than 1m. The water inlet and outlet of each layer of water pipe shall be staggered from each other, and the water inlet shall be equipped with a water valve for regulating flow and flow measuring equipment. The cooling water pipe connector adopts a hose connector.