China Manufacturer High Temperature Ceramic Fiber Module 6inch

Modules, including folding block, slicing block, Parrot block and vacuum forming block. Due to the different manufacturing methods and crystal structure of polycrystalline mullite fiber, its fiber length is short and its flexibility is poor. The polycrystalline fiber can not be applied on a large scale because it cannot be made into a large module. The polycrystalline fiber is mostly used for sticking blocks on the inner surface of castable or refractory brick furnace wall and furnace top. The use of polycrystalline fiber sticking blocks can effectively reduce the temperature of furnace outer wall and reduce the heat storage loss of furnace wall.

Excellent chemical stability; Excellent thermal stability; Excellent elasticity. The ceramic fiber module is in the pre-compression state. After the lining is built, the expansion of the ceramic fiber module makes the lining seamless and can compensate for the shrinkage of the fiber lining to improve the thermal insulation performance of the fiber lining. The overall performance is good; Excellent thermal stability and thermal shock resistance; The ceramic fiber module is installed quickly, and the anchor is set on the cold side of the wall lining, which can reduce the requirements of the anchor material.