Good Quality Stainless Steel Bearing Housing with Sucfa200 Series

Also known as a winch box, it is a box part that supports and lubricates bearings. At the same time, bear the axial and radial forces generated by the equipment during operation. In equipment with rotating shafts, the shaft is generally supported and rotated by bearings, which are installed in a bearing box filled with lubricating oil. During operation, bearings are used to obtain lubrication. At the same time, various forces received by the shaft during operation will also be transmitted to the bearing box, which will bear the load. The material of the bearing box is generally cast iron and cast steel. Mostly used for wheel sets.

A motor cannot work without bearings. "Because the shaft can move in any direction, the motor requires that the shaft only rotate when it is operating.". Theoretically, it is impossible to achieve the transmission effect. Moreover, bearings can also affect the transmission. In order to reduce this impact, good lubrication must be achieved on the bearings of high-speed shafts. Some bearings already have lubrication, called pre lubricated bearings, while most bearings must have lubricating oil. During high-speed operation, friction not only increases energy consumption, but also makes it easy to damage the bearings. The idea of converting sliding friction into rolling friction is one-sided, because there is something called sliding bearings.