Automatic Gypsum Board Manufacturing Machine, Dry Mortar Mixing Plant

The choice of heat source for drying equipment can be hot air furnace, fluidized bed furnace, etc. The cost of a hot air stove is lower, but it needs to burn coal well and will not produce slag; Fluidized bed furnaces have a relatively high cost and can burn coal. The selection of drying equipment is mainly based on the local actual situation. If it is in a coal production area and the environmental requirements are not strict, a fluidized bed furnace can be used.

Dry powder mortar, also known as mortar dry powder material or dry mixed mortar, refers to a granular or powdery mixture produced by professional manufacturers and mixed with fine aggregate inorganic binder, water retaining and thickening material, mineral admixture, and additives in a certain proportion after drying and screening treatment. Simply put, it mainly consists of yellow sand, cement, thickened powder, fly ash, and admixtures. In addition, admixtures such as early strength agents and quick drying agents are added according to the variety requirements. It can be transported to the construction site in packaging or bulk, and mixed with water according to the specified proportion before direct use.