3D Metal Car Sticker

3D Metal Car Sticker

How to apply 3D metal car stickers

‌ The steps of applying 3D metal car stickers mainly include determining the sticker position, cleaning the surface, cutting the sticker, removing the backing paper, applying the sticker, eliminating bubbles and checking the flatness. ‌

‌ Determine the sticker position ‌: First, place the metal sticker on the part of the car where it needs to be applied, outline the outline with a pencil or brush, and determine the final position.

‌ Clean the surface ‌: Use a cleaning cloth to wipe the surface to be applied to ensure that it is clean, oil-free and dust-free. This is to ensure that the sticker can adhere to the surface of the car more firmly.

‌ Cut the sticker ‌: According to the outlined outline, use scissors or a utility knife to cut the metal sticker to the appropriate size, and be careful not to make the sticker too small or too large.

‌ Remove the backing paper ‌: Peel off the protective paper on the back, leaving only the sticker itself, ready to apply.

‌Apply the sticker‌: Place the cut sticker on the previously determined position, and press gently with your fingers or a scraper to ensure that the sticker fits tightly to the car surface. If there are bubbles in the sticker, you can use a scraper to slowly squeeze them out.

‌Completion inspection‌: After the sticker is completed, check whether it is flat and fits well

3D car stickers are so cool! Very strong reflective effect, not only convenient for night driving, but also can increase driving, fit the car body, sun protection and high temperature resistance, making the car stickers more durable.

When applying 3D metal car stickers, you need to pay attention to the following points to ensure the beauty and durability of the stickers:

‌Choose the right sticker position‌: Before applying the sticker, carefully consider the position of the sticker to ensure that the sticker can show the best effect‌.

‌Clean the body surface‌: Before applying the sticker, thoroughly clean the body surface to ensure that there is no grease, dirt or old sticker residue. This will help the sticker adhere to the body more firmly‌.

‌Use the appropriate tools‌: Use a plastic scraper or credit card to help flatten the sticker and eliminate bubbles. If you encounter bubbles, you can gently puncture them with a fine needle and press them flat again‌.

‌Avoid immediate washing‌: Wait at least 24 hours after applying the sticker to allow the sticker to fully cure, and avoid washing the vehicle immediately after the sticker is applied‌.

‌Pay attention to material properties‌: For 3D metal stickers, you may need to use a special adhesive to enhance the stickiness, especially on plastic or rubber materials‌.

‌Appropriate adjustment‌: After the general position of the graphic is determined to be correct, scrape off the water and bubbles repeatedly with force, tear off the transparent transfer film, and ensure the flatness of the sticker‌.

‌Handling special parts‌: When encountering door handles or anti-scratch strips, cut the material according to the situation and wrap it inside to prevent the sticker from separating from the car body or protruding.

Following these precautions can ensure the beauty and durability of 3D metal car stickers, and also avoid common sticker problems such as bubbles, warping, etc.

The benefits of applying 3D metal car stickers include improving the appearance of the vehicle, personalizing it, protecting the paint, and covering scratches. ‌

First of all, 3D metal car stickers can significantly improve the aesthetics of the vehicle, adding fashionable and personalized elements to the vehicle, making it stand out among many vehicles. This type of sticker is usually of higher quality and is able to withstand the test of time, keeping the vehicle's appearance new and unique‌.

Secondly, the personalized features of 3D metal car stickers allow car owners to choose different patterns and designs according to their own preferences, thereby expressing personal style and taste. This kind of sticker not only decorates the vehicle, but also becomes a reflection of the car owner's personality and attitude.

In addition, 3D metal car stickers can also protect car paint. They can be covered on the car body to prevent the car body from direct contact with the external environment and reduce damage to the car paint due to sun, rain and other factors. At the same time, these stickers can effectively cover some scratches without damaging the car paint, maintaining the original beauty of the vehicle.