Greenhouse Shader

SUN – Pros and Cons
Sunlight is one of the key sources of living bodies,
But more than the necessary amount, creates problems for crops,

What are these?

• UV & IR lights and high temperature in green house 
• Slowdown of photosynthesis 
• High transpiration, water and energy losses 
• As a result yield and quality loss 
• Create difficult environment for worker 
• Under stress conditions high light damages chloroplasts

Advantages of GreeHouse Shader

 
• Doesn’t depend on the crop inside the greenhouse - Can be used with every kind of culture, 
• Creates the shade density farmer wants for his crops, depending on dosage, 
• Optimum photosynthesis temperature, 
• Decreases transpiration and water loss, 
• Good Environment inside for worker, 
• Not easy rain wash, long lasting, heavy rain may wash 40-50%, 
• Saves re-treatment cost and work, 
• Can be applied with all type of sprayers without giving any damage to any part, 
• No adverse effect on plastic, glass, other parts and putty of greenhouse, 
• Easy wash and clean after season with water and brush,

Suggestions

 
• 1 buckle, 6 lt for 1000m2 gives 50-60% of shade under normal conditions
• In Rainy conditions, repeat application after one week 
• For less shade; 4 lt for 1000 m2 
• For more shade 12 lt (2 bucles per )150 lt water for 1000 m²

PLANT STRESS FACTORS

Ozone
Extreme Temperatures
Flooding
Drought
Salt

Pre application control
Check weather forecast;

 
• Calm weather at application date 
• No rain expectation at, and 2-3 days after application

Check your sprayer;

 
• Minimum 100 lt garden sprayer 
• 1,5-2,0 mm nozzle diameter 
• Control mixing device. Check if sprayer and mixing device working properly

Pre application preparation

Pre-mix; pour the necessary amounts of Greenhouse Shader in a bowl with 8-10 times water of product's own volume (i.ei Mix 6 Lt Greenhouse Shader with 50-60 Lt water). Ideally one night before. If not possible 2 hours earlier than application.

 
• 1 bucket, 6 lt for 1000m2 gives 50-60 % of shade under normal conditions

Rainy country,

• Repeat application after one week

Flower Grower,

 
• For less shade; 4 lt for 1000 m2 
• For more shade 12 lt,(2 bucket per )150 lt. for 1000 m2

Application preparation

• Make calibration to cover 1000 m2 with 100 lt water spray 
• Wash all the surface of green house with sprayer to clean dust and dirty 
• Wait until all the surfaces dry out

Half of the sprayer shall be filled with water and prepared mixture shall be added into half-filled tank and then fill the tank with water by agitating mixing device of sprayer.
Keep mixing until the end of application.

Spraying
Spray homogeneously all surfaces without leakage
For high green houses, got on the tractor and use 2-2,5 m stick.

After Application
Wait around 2 hours for drying of production the greenhouse surface
You can clean product cover by washing with water and brush

GREENHOUSE SHADER ENGLISH LABEL

GREENHOUSE SHADER RUSSIAN LABEL

GREENHOUSE SHADER FRENCH LABEL

GREENHOUSE SHADER SPANISH LABEL

GREENHOUSE SHADER ITALIAN LABEL

GREENHOUSE SHADER PORTUGUESE LABEL