Factory Price Transmission Parts Hardened Tooth Sprockets

The tightness of the sprocket should be appropriate. Too tight will increase power consumption, and the bearing is easy to wear; The chain wheel is too loose to jump and fall off. The tightness of the sprocket is: lift or press from the middle of the sprocket, about 2% - 3% of the center distance between the two sprockets. After the sprocket is seriously worn, replace it with a new sprocket and a new sprocket at the same time to ensure good engagement. Do not replace a new sprocket or a new sprocket alone. Otherwise, it will cause poor engagement and accelerate the wear of new sprocket or new sprocket. After the tooth surface of the sprocket is worn to a certain extent, it should be turned over in time for use (referring to the sprocket used with adjustable surface) to extend the service time.

Sprocket is a kind of wheel with cogged sprocket, which is used to mesh with the block with accurate pitch on the chain link or cable. Sprockets are widely used in chemical industry, textile machinery, escalators, wood processing, three-dimensional parking garages, agricultural machinery, food processing, instrumentation, oil and other industries.