Factory Price Industrial Evaporative Air Cooler Cold Room Evaporator Refrigeration Evaporator

Product Features

1. The inner diameter of the evaporator is φ A 200mm metal circular basin with a height of approximately 100 mm.

2. The evaporator should have a metal circular structure, and the inner wall should be smooth. The evaporator blade should not have defects such as burrs or bumps.

3. All parts in contact with water should be smooth, and their mating or connecting welds should be tight, firm, and free from water leakage.

4. The assembly of various parts and components of the evaporator should be correct, and there should be no looseness, deformation, or other defects that affect its use.

5. The protective layer applied to all parts and components of the evaporator should be firm, uniform, smooth, and free from defects such as delamination and rust.

6. The evaporator and installation frame should be easy to install and ensure that the evaporator will not detach due to wind influence during normal use.

7. Attachment: One graduated measuring cup, one water storage device, one installation frame, and one metal wire mesh cover (bird proof drinking water, user selectable)

It can be divided into atmospheric, pressurized, and vacuum evaporation operations. Obviously, for heat sensitive materials such as antibiotic solutions, fruit juices, etc., they should be processed under reduced pressure. High viscosity materials should be evaporated using a pressurized high-temperature heat source for heating (such as heat transfer oil, molten salt, etc.)

It can be divided into single effect and multi effect evaporation. If the secondary steam generated by evaporation is directly condensed and no longer used, it is called single effect evaporation. If the secondary steam is used as the next heating steam and multiple evaporators are connected in series, this evaporation process is called multi effect evaporation.