Automatic Cool Room Condenser and Evaporator Heat Exchanger

Product Features

1. The inner diameter of the evaporator is φ A 200mm metal circular basin with a height of approximately 100 mm.

2. The evaporator should have a metal circular structure, and the inner wall should be smooth. The evaporator blade should not have defects such as burrs or bumps.

3. All parts in contact with water should be smooth, and their mating or connecting welds should be tight, firm, and free from water leakage.

4. The assembly of various parts and components of the evaporator should be correct, and there should be no looseness, deformation, or other defects that affect its use.

5. The protective layer applied to all parts and components of the evaporator should be firm, uniform, smooth, and free from defects such as delamination and rust.

6. The evaporator and installation frame should be easy to install and ensure that the evaporator will not detach due to wind influence during normal use.

7. Attachment: One graduated measuring cup, one water storage device, one installation frame, and one metal wire mesh cover (bird proof drinking water, user selectable)

Direct heat source heating refers to the evaporation process of mixing fuel with air, causing the high-temperature flame and smoke generated by its combustion to be directly sprayed into the evaporated solution through a nozzle to heat the solution and vaporize the solvent.

Evaporators are divided into three types according to operating pressure: normal pressure, pressurized, and depressurized. According to the movement of the solution in the evaporator, it can be divided into: ① circulating type. Boiling solution passes through the heating surface multiple times in the heating chamber, such as central circulation tube type, hanging basket type, external heating type, Levin type, and forced circulation type One way type. The boiling solution passes through the heated surface in the heating chamber at once without circulating flow, and the concentrated solution is discharged, such as rising film, falling film, stirring film, and centrifugal film Direct contact type. The heating medium directly contacts the solution for heat transfer, such as an immersed combustion evaporator. During the operation of the evaporation device, a large amount of heating steam needs to be consumed. To save heating steam, a multi effect evaporation device and a steam recompression evaporator can be used. Evaporators are widely used in departments such as chemical and light industries.