Aluminum Cool Room Condenser and Evaporator Heat Exchanger

Product Features

1. The inner diameter of the evaporator is φ A 200mm metal circular basin with a height of approximately 100 mm.

2. The evaporator should have a metal circular structure, and the inner wall should be smooth. The evaporator blade should not have defects such as burrs or bumps.

3. All parts in contact with water should be smooth, and their mating or connecting welds should be tight, firm, and free from water leakage.

4. The assembly of various parts and components of the evaporator should be correct, and there should be no looseness, deformation, or other defects that affect its use.

5. The protective layer applied to all parts and components of the evaporator should be firm, uniform, smooth, and free from defects such as delamination and rust.

6. The evaporator and installation frame should be easy to install and ensure that the evaporator will not detach due to wind influence during normal use.

7. Attachment: One graduated measuring cup, one water storage device, one installation frame, and one metal wire mesh cover (bird proof drinking water, user selectable)

Natural evaporation: refers to the evaporation of a solution at a temperature lower than the boiling point, such as when salt is exposed to seawater. In this case, due to the solvent only vaporizing on the surface of the solution, the solvent vaporization rate is low.

The indirect heat source heats the walls of the container and transfers it to the evaporated solution. The heat transfer process carried out in a wall type heat exchanger.