High Quality Carton Corrugate Box Sleeve Sealing Shrink Wrapping Shrinking Packaging Wrapper Packing Tunnel Machine

When the machine is specified to have a three-phase 380V power supply, the zero line must be input simultaneously, which is similar to other packaging equipment in the standard three-phase four wire system, such as vacuum packaging machines. Otherwise, the machine will not function properly and it is highly likely to burn out internal electrical components. The machine must be installed horizontally, otherwise it will shorten the service life of the electric heating tube. For machines with conveyor belts, their inclined installation will cause the conveyor belt to deviate from the center.

There are two ways to wrap items with flat film: single flat film and double flat film. The film should be wider than the object, using a double flat film, that is, wrapping it with two films on top and bottom. While the previous packaging is completed with sealing and cutting, the two films are sealed together. Then, the product is pushed into an upright film by machine or hand, and the sealing and cutting mechanism falls in place. The other side of the product is sealed and cut off. The product wrapped in the film shrinks after heat shrinkage, and the two ends of the packaging shrink to form an elliptical opening. When using a single flat film, First, unfold the flat film and feed the wrapped product towards the middle of the film to form a horseshoe shaped wrap, then heat seal and overlap the seal.