High Quality Ribbon Made Glass Lifting Sling with 4 Layer Inside in Package

When using glass lifting straps for glass transportation, the operation process is relatively simplified. The operator only needs to insert the lifting ears of the sling into the two ends of the suspension beam, fix them at the same position as the glass package, and then place the base in the center position of the bottom of the sling to start lifting. When unloading the glass package, simply smoothly slide the sling onto both sides of the package, ensuring that the protective straps of the sling are tightly secured on both sides, and then slowly lift it up. This simplified operation process reduces the difficulty of operation and improves work efficiency.

When using glass lifting straps, it is necessary to verify the rated load of the glass lifting straps before use, and overloading operations are strictly prohibited. Maintain stability during operation to avoid scratching the glass lifting belt by surrounding glass bags or sharp workpieces. Before, during, and after use, the use of glass lifting straps should be checked, especially for any damage to the main straps. If the main damage area is large, it should be immediately stopped from use or scrapped. After use, the glass lifting strap should be properly stored in a dark and UV free environment, avoiding storage near open flames or other heat sources.