Installation and commissioning of gypsum powder machine

1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.

2. During installation, attention should be paid to the vertical position of the main body and the horizontal.

3. After installation, check whether the bolts in each part are loose and whether the main engine compartment door is fastened. If so, please tighten it.

4. Configure the power cord and control switch according to the power of the device.

5. After the inspection is completed, conduct a no-load test run, and production can proceed once the test run is normal.

Gypsum powder machine, also known as drying hammer, is used for crushing and drying soft and non abrasive materials, such as gypsum, chalk, clay, slurry filter cake, etc. It can disperse, dry, and calcine industrial by-products gypsum and flue gas desulfurization gypsum. This machine has high production efficiency, low energy consumption, and has the function of dispersing and crushing while drying. The rotating rotor disperses the material, hot air dries the material, and the airflow brings the broken and dried material to the separation chamber. The fine powder then enters the cyclone for separation, and the coarse particles return to the hammer crusher for further crushing.

Huangye88.com - China B2B Marketplace