Product Description

KOC, based in the South Korea, is a globally recognized manufacturer of fiber optic products and specializes in integrated fiber optics solutions and service. We have been supplying a high level of the quality and cost-effective fiber optic products over the world, delivering our best effort to customer’s requirements since 1997. We have possessed cutting edge manufacturing facilities, world-class technologies and a strong R&D capability. KOC will do its best to be a pioneer of the future technology and to remain continuously dedicated to the improvement of all its products and services.

Field Assembly Optical Connector - SC type

Sold in a set for 10 connectors
Random assorted colors

Item
- Field Installable Connector
- Fast Installable Optical Connector
- Pre-polished Optical Connector
- Quick Assembly Connector
Application
- Fiber Optic Telecommunication
- Fiber Distribution Frame
- FTTH Outlets
- Optical Cable Interconnection
- Cable Television
Features
- Quick and easy fiber termination
- Available to re-use
- High success rate of connection
- Superior optical characteristic value
- Simple assembly process
- No failure after openning
Assembling Tools
- Cleaver
- Scissors
- Gauze with Alcohol
- Stripper

Type Sold in a set for 10 connectors Random assorted colors
- Type 1 : 3.0mm (Round) type x 10 ea

- Type 2 : 2.0mm X 3.0mm (Flat) type x 10 ea

- Type 3 : 1.6mm X 2.0mm (Flat) type x 10 ea

- Type 4 : 2.0mm (Round) type x 10 ea

- Type 5 : 250μm&900μm (Round) type x 10 ea

Sold in a set for 10 connectors
Random assorted colors
An SC type FAOC is the most widely used fiber optic connector in FTTx that does not need epoxy or polishing. It enables fast and on-site installation of 250μm, 900μm, 3.0mm and 1.6mm x 2.0mm, 2.0mm x 3.0mm cable type connectors even when the user has no access to power. Two or three pieces of the preassembled and factory terminated connectors can be installed within 2 minutes using simple tools and can be recycled several times. It accommodates a reliable and durable optical network especially suitable for advanced fiber optic systems requiring exceptional stability and low loss. KOC FAOC has been recognized as a "Korean World-class Product" by the Ministry of Knowledge Economy.

Connector type

V-groove type
Fiber type
- SM : Standard Single Mode Fiber type
- MM : Multi Mode 50/125 & 62.5/125 Micron fiber type (OM1, OM2, OM3, OM4)

Ferrule Polishing type
- PC type : Physical Contact type
- APC type : Angled Physical Contact type
Connector type for using cable type
- 3.0mm (Round) type : All-In-One [2pcs parts]
- 2.0mm (Round) type : All-In-One [2pcs parts]
- 2.0mm X 3.0mm (Flat) type : All-In-One [2pcs parts]
- 1.6mm X 2.0mm (Flat) type : All-In-One [2pcs parts]
- 250μm&900μm (Round) type [3pcs parts] → with assembling jig tool & 900μm fit tube

Product Specifications

Item	Specification
Standard	TIA / EIA 604-3 [SC]
Insertion Loss	Typ. 0.3dB / Max. 0.5dB
Return Loss	Typ. 50dB / Max. 55dB [PC], Typ.55dB / Max. 60dB [APC]
Endurance	500 times reconnection / ≤ 0.3dB
Tension	[3.0mm, 1.6mm X 2.0mm, 2.0mm X 3.0mm] 3.0kg / ≤ 0.2dB change [250μm&900μm] 0.75kg / ≤ 0.2dB change
Temperature Change	21 times / -40ºC ~ +75ºC / ≤ 0.3dB change

End Face Geometry [Based on GR-326]	PC type	APC type
Ferrule Endface Radius (mm)	7~25	5~12
Fiber Undercut (nm)	Less than 100	Less than 100
Fiber Protrusion (nm)	Less than 100	Less than 100
Apex Offset (um)	Less than 50	Less than 50

* Interferometer measuring equipment : CC6000 / Norland, ACCIS NC-3000 / Norland

Assembling Manual
- 3.0mm (Round) type / 2.0mm (Round) type

1. Check the parts, insert boot to cable

2. Check the length for cutting fiber

3. Check Jig setting

4. Insert the fiber to connector

5. Make sure fiber bending

6. Pull out the Jig

7. Press the button
(Yellown cover)

8. Release the bending

9. Lock the boot With yarn	10. Cut the yarn	11. Completion to assemble

- 2.0mm X 3.0mm (Flat) type / 1.6mm X 2.0mm (Flat) type

1. Check FAOC parts

2. Insert boot to cable

3. Remove outer jacket about 40 mm

4. Strip out UV coating after 20 mm

5. Cut the fiber with cleaver

6. Check the length of fiber

7. Insert the fiber to connector

8. Make sure fiber bending

9. Remove cover Jig

10. Press the button
(Yellow cover)

11. Lock the boot

12. Completion to assemble