Hot sale Polyester Cargo Lashing Ratchet Retractable Strap

To bundle goods, pass the belt through the bottom of the ratchet. The groove at the bottom of the ratchet, called the "spindle", is used to fix the length of the webbing. To thread the belt, start under the ratchet and push it up through the spindle. The threaded tape shall then be placed straight and its length shall overlap the second tape on the other side of the ratchet. Continue to pass the strap through the spindle until you feel the tension. Remember, you can tighten it with a ratchet later, so don't worry too much about its length.

When using, first release the locking pin to open the ratchet. The release pawl, also known as the release lever, is a smaller handle that releases the ratchet handle. It is located in the center of the movable part at the top of the ratchet wheel. Pull up the release latch and fully open the ratchet. Place the open ratchet on the table in front of you with the spiked wheel (gear) facing up.