Customized Small Hollow Block Brick Making Machine with Low Cost

The process of producing bricks using a vacuum brick machine: The clay is stirred with a clay mixer, mixed with some sand and stone powder, evenly mixed, and then transported to a vacuum brick machine through a conveyor belt. After being compressed by a vacuum brick machine under vacuum pressure, the bricks are formed. After the bricks are produced, they are cut into evenly sized bricks through a dividing machine, and then automatically grabbed by a palletizing machine, placed in a kiln car, and fired in a furnace.

Technical security

1. When the machine is running, all protective covers and floor covers must be installed.

2. Check the grounding wire of the electrical part to avoid leakage, short circuiting, and other phenomena.

3. It is strictly prohibited to stand in the direction of the motor to avoid accidents.

4. When any abnormalities are found in the machine, it should be immediately stopped for inspection and troubleshooting.

5. When the brick machine is not in operation, the feeding mechanism is not allowed to be started to avoid damage to the billet parts due to overload.