Wholesale Desktop Automatic Ice Maker Machine

Ice maker precautions

1. The ice maker should not be placed in an outdoor environment. It is best to install it in a safe, clean, and well ventilated environment, and avoid direct sunlight and rain.

2. The ice maker should not be close to heat sources, and the operating environment should not be lower than 5 ℃ or higher than 40 ℃ to avoid excessive temperature affecting the heat dissipation of the condenser and not achieving good ice making results.

3. The ice maker should be installed on a stable platform and the foundation screws at the bottom of the machine should be adjusted to ensure that the machine is placed horizontally, otherwise it may cause non deicing and noise during operation. There should be space left around the machine, and in order to facilitate heat dissipation, the space on the left, right, and rear of the machine should not be less than 150mm.

The ice maker automatically enters a water storage tank through a makeup water valve, and then the water is pumped through a flow control valve to the diversion head. There, the water is evenly sprayed onto the surface of the ice maker, flowing like a water curtain through the wall of the ice maker. The water is cooled to the freezing point, while the water that has not been evaporated and frozen will flow into the storage tank through a multi hole tank, restarting the cycle work.