CREATE YOUR LISTING

Hebei Renlong Pipe Fittings Co., Ltd.

Main products: products include Pipe , Elbow, Tee, Bend, Cross, Reducer, Cap, Flanges, Valves, Bolts

Home/Products/异径管,大小头/ASME B16.9 Eccentric Reducer 12"x10" SCH40 Seamless Hot Pushed A234 WPB Butt Weld Pipe Fitting/
ASME B16.9 Eccentric Reducer 12"x10" SCH40 Seamless Hot Pushed A234 WPB Butt Weld Pipe Fitting
ASME B16.9 Eccentric Reducer 12"x10" SCH40 Seamless Hot Pushed A234 WPB Butt Weld Pipe Fitting - Image 1ASME B16.9 Eccentric Reducer 12"x10" SCH40 Seamless Hot Pushed A234 WPB Butt Weld Pipe Fitting - Image 2ASME B16.9 Eccentric Reducer 12"x10" SCH40 Seamless Hot Pushed A234 WPB Butt Weld Pipe Fitting - Image 3ASME B16.9 Eccentric Reducer 12"x10" SCH40 Seamless Hot Pushed A234 WPB Butt Weld Pipe Fitting - Image 4ASME B16.9 Eccentric Reducer 12"x10" SCH40 Seamless Hot Pushed A234 WPB Butt Weld Pipe Fitting - Image 5ASME B16.9 Eccentric Reducer 12"x10" SCH40 Seamless Hot Pushed A234 WPB Butt Weld Pipe Fitting - Image 6

ASME B16.9 Eccentric Reducer 12"x10" SCH40 Seamless Hot Pushed A234 WPB Butt Weld Pipe Fitting

Update time:2026-11-20 15:04:40
Price:$ 10 - $ 10 / unit
Min Order:1 unit

Basic Info

Eccentric ReducerDN300 / NPS 12″

Product Description

ASME B16.9 Eccentric Reducer 12"x10" SCH40 Seamless Hot Pushed A234 WPB Butt Weld Pipe Fitting

This ASME B16.9 eccentric reducer is manufactured by seamless hot pushing process from ASTM A234 WPB carbon steel, connecting a 12″ (DN300, OD 323.9 mm) pipe to a 10″ (DN250, OD 273.0 mm) line. With SCH40 wall thickness, 203 mm end-to-end length and 30°–37.5° bevel ends, it is designed for butt-welded installation in oil & gas, petrochemical and power piping systems. The eccentric design keeps one side of the pipe run straight, preventing gas pockets in liquid lines (bottom flat) or liquid accumulation in gas lines (top flat). Each piece is supplied with dimensional inspection report, NDT results where required, and EN 10204 3.1 material certificate.

  • Seamless hot-pushed body with no weld seam; pressure and fatigue performance close to the mother pipe
  • D1/D2/H dimensions controlled strictly to ASME B16.9; correct fit-up on site at the first attempt
  • Actual measured 9.53 mm SCH40 wall at the large end; no thinning shortcuts
  • Eccentric orientation customizable as bottom flat or top flat, marked TOP/BOTTOM at the factory to prevent wrong installation
  • Third-party witnessed inspection (SGS / BV / TUV) and 3.1 material certificate available
  • ASME B16.9 eccentric reducer, DN300×DN250, SCH40 wall thickness, formed by hot pushing from seamless steel pipe, in ASTM A234 WPB carbon steel, with standard butt-weld bevels at both ends. The eccentric design keeps one generatrix straight. In horizontal piping, it can be specified as bottom flat to prevent gas pockets in liquid service, or top flat to prevent liquid accumulation in gas service. It is widely used for diameter transitions in oil and gas gathering, refining units, power plant piping and large water treatment projects. Every piece is inspected for outside diameter, length, wall thickness and ovality, and can be supplied with a 3.1 material certificate and NDT reports.

Recommended Products

Recently Viewed

Contact Us

  • Hebei Renlong Pipe Fittings Co., Ltd.