Home/Products/异径管,大小头/SCH40 Concentric Reducer, ASME B16.9 American Standard Concentric Reducer / Welded Concentric Reducer/
SCH40 Concentric Reducer, ASME B16.9 American Standard Concentric Reducer / Welded Concentric Reducer
Update time:2026-11-20 15:11:35
Share
Price:$ 10 - $ 10 / unit
Min Order:1 unit
Basic Info
Concentric Reducer
Welded
Product Description
SCH40 Concentric Reducer, ASME B16.9 American Standard Concentric Reducer / Welded Concentric Reducer
Clear cost advantage in large sizes; from DN350 upward it is a step cheaper than seamless
Longitudinal seam 100% RT/UT inspected, reinforcement ground flush for a smooth internal transition
Concentric design has no orientation; installs either way, so stocking and site work are hassle-free
D1/D2/H controlled to B16.9; bevel ends fit standard pipe directly
3.1 material certificate, weld inspection reports and third-party witnessing available
ASME B16.9 concentric reducer, fabricated from ASTM A234 WPB steel plate by rolling and longitudinal seam welding, SCH40 wall thickness, with standard butt-weld bevels at both ends. Both ends are on the same axis with an even conical transition, giving a symmetrical flow pattern and no installation orientation requirement. It suits vertical pipe transitions, pump discharges, heat exchanger and column nozzles, water treatment and district heating networks. All longitudinal seams are 100% radiographed or ultrasonically tested; post-weld stress relief heat treatment is available for critical service. Each unit ships with dimensional inspection records and a 3.1 material certificate.