cnc plate rolling machine manufacturers

Instructions for use

Preparation: Make sure the equipment is in good condition and check whether all safety devices are normal.

Loading: Place the metal sheet on the lower roller and ensure that the sheet is flat and not twisted.

Adjust the roller distance: Adjust the position of the upper roller and side rollers according to the shape and size of the workpiece to be rolled.

Start the equipment: Start the hydraulic system to raise the lower roller and press the end of the sheet between the upper and lower rollers.

Rolling process: By controlling the hydraulic system, the sheet is rolled step by step until it reaches the required shape and size.

Unloading: After rolling, remove the sheet from the equipment for subsequent processing.

Operation Instructions

Safety Check: Before operation, equipment safety check must be carried out to ensure that all safety devices are working properly.

Multi-person collaboration: When multiple people work together, there must be a dedicated person to direct to ensure that the operation is carried out in an orderly manner.

No overload: Overload work is strictly prohibited to avoid equipment damage.

Interruption handling: After the work is interrupted, the clutch should be put into neutral to prevent accidental start-up.

Technical parameters

Rolling capacity: The maximum rolling thickness and width depend on the specific model. For example, Baileigh Industrial’s CNC Roll Bender can handle sheets with a maximum thickness of 20mm.

Accuracy: The accuracy of CNC plate rolling machines is usually within ±0.1mm, ensuring high quality and consistency of products.

Efficiency: Efficient rolling speed and automated operation significantly improve production efficiency.

Precautions

Hand and foot safety: During operation, it is strictly forbidden to put hands and feet on the rollers, transmission parts and workpieces to prevent accidental injuries.

Equipment maintenance: Regular equipment maintenance and maintenance to ensure long-term stable operation of the equipment.

Operation training: Operators must undergo professional training and be familiar with the operating procedures and safety precautions of the equipment.

Through the above introduction, it is hoped that users can better understand the use, operation instructions and precautions of the CNC plate rolling machine to ensure that the bending and forming of metal plates can be completed safely and efficiently during use.