Steel Gate Flat Type Reservoir Water Stop Stainless Steel Gate Channel Water Stop Interceptor Integrated Gate

If needed, please contact email: chinarubberdam@outlook.com

The basic principle of a steel dam is that the power source is hydraulic opening and closing machines as the driving machine equipment. These two driving machine equipment are arranged in the driving rooms on both sides of the dam. They go through the hydraulic opening and closing machines in the side piers on both sides to push the turning arm driver of the gate. The turning arm pushes the bottom shaft to flip, and the steel gate leaf is riveted to the bottom shaft, so as to achieve the purpose of storing water when the gate is firm and draining the pipeline when lying down. And the bottom shaft water stop, gate side water stop, and hinge seat water stop have always maintained a sealed water stop situation. When the door is firmly raised, it may lie down, and the bottom shaft rubber water stop strip is not easy to leave the bottom shaft surface and thus not easy to form water seepage; The rubber waterstop strip on the side of the gate is installed on both sides of the door and passes through the pinching and kneading of the armpit corner to achieve the purpose of waterstop. Generally, the "M" - shaped waterstop method is used. When the gate is lying down, it is not easy to harm the opening and closing of the gate and may not easily form side seepage due to the fact that the river stopping surface has not freed itself from the armpit corner.