Welcome!
Chamber Size | 1000L (customizable) | Model | DR-H501 | Power Supply | 220V, 50/60Hz (customizable for different regions) |
---|---|---|---|---|---|
Rain Drop Intensity | 0-100 mm/h (adjustable) | Rain Spray System | Adjustable spray nozzles with uniform water distribution | Test Chamber Material | Stainless steel (corrosion-resistant) |
Type | Environmental Simulation Rain Test Chamber | Water Flow Rate | 1-5 L/min (customizable based on chamber size and test requirements) | Water Source | Direct connection to water supply or external water tank |
Environmental simulation two - rainwater test chamber.
A two - rainwater test chamber for environmental simulation is a device used to simulate the natural rainfall environment and test the waterproof performance of products.
The environmental simulation two - rainwater test chamber simulates the natural rainfall or specific - condition spraying environment through high - precision control systems, so as to carry out different water - resistance tests on products. It can precisely adjust the intensity, direction, temperature, and duration of rainfall to simulate different levels of water - resistance test standards. During the test, the product is placed inside the test chamber and subjected to continuous or intermittent spraying from multiple nozzles to inspect its shell sealing performance, internal component water - resistance treatment, and overall water - resistance capability.
The environmental simulation two - rainwater test chamber is usually composed of a stainless - steel box, a spraying device, a PLC control system, and a water storage tank. The outer shell of the box is made of SUS304 stainless - steel plate; the pendulum pipe usually has a swing range of 270 degrees or more and can simulate rainfall spraying at different angles. There are uniformly distributed water - spraying holes on the pendulum pipe, and the diameter of the water - spraying holes is usually 0.4mm or 0.8mm, and the quantity varies according to the model. The PLC control system is used for test setting and operation; the water storage tank is located at the bottom of the test chamber and is used to store the test water.
The environmental simulation two - rainwater test chamber is mainly used to assess whether the shells and sealing parts of electrical and electronic products, automobiles, motorcycles, and instruments and meters can ensure the good working performance and technical state of the products and components after or during the water test. At the same time, it can also simulate the possible influence of rainfall during product transportation or use, providing an application basis for product technical standards.
Contact Us
Guangdong Derui Testing Equipment Co., Ltd.