Medical instrument flow tester

Medical instrument flow tester Operating Interface: Simplified Chinese/English test standard: GB15811“Disposable sterile injection needle” GB18671“Disposable intravenous infusion needle” display: 7-inch K600 + kernel/lattice 65-color 800 * 480 resolution touch screen display, pLC control system dynamic display loading force value; Operation Interface: Chinese/English/Chinese/English switch; digital closed-loop control, AD acquisition speed of 500 khz, internal code 500,000; high-precision clock chip, power-off storage; Overload alarm shutdown protection; touch control operation: nominal specifications, test load, print, test, uplink, downlink, time, calibration. Programmable controller: PLC + ARM, sensor: high-precision force sensor with hardware and software protection function configuration requirements: host + 6 mm standard trachea 6 m 2.3 pressure output range: higher than the local atmospheric pressure, 10 kpa ~ 100 kpa, display mode: LCD digital display; can set the pressure output value arbitrarily, the verification error is less than ± 2.5% of the reading. Test duration: 5 Seconds to 99.9 minutes, LCD digital display, error is not more than ± 1s. For a catheter with a nominal outside diameter less than 1.0 mm, the flow rate shall be 80% to 125% of the manufacturer's indicated value, and for a catheter with a nominal outside diameter greater than or equal to 1.0 mm, the flow rate should be 90% to 115% of the manufacturer's stated value. Printed form: Airborne Dot matrix printing power supply: ac90v-240v50hz net weight: 11kg profile size: 400x290x240(mm)

Medical instrument flow tester Introduction of manufacturers：Shanghai Yingle Instrument Co. , Ltd. (formerly Shanghai Xingle) is located in the manufacturing capital-shanghai, the company was founded in 1993, is a set design, research and development, sales of medical supplies physical performance testing equipment manufacturers. The company's products mainly serve the third-party testing organizations, medical supplies production unit quality laboratories and R & D Center, etc. , is a domestic (Shou) home disposable medical device physical performance test equipment manufacturers, but also the first (Shou) home CMC Certification Enterprises, the company mainly produces medical stainless steel needle tube testing equipment, medical syringe testing equipment, medical infusion device testing equipment, medical suture needle, thread testing equipment, 6% RUHR connector testing equipment. Technical indicators with medical packaging industry standards updated at any time to ensure that the company's products to the latest standards to serve customers.