High Frequency Stainless Steel 304 Pipe 316 Stainless Steel Pipe for Cooling Pipe

Impact corrosion and abrasion of cooling tubes usually occur only on copper alloy tubes, which is a type of localized corrosion. This is due to the high intensity of flow turbulence on the metal surface at the corrosion site, which is sufficient to cause mechanical or electrochemical damage to the oxidation protective film. It has characteristics similar to pitting corrosion, and its shape evolution is often affected by local flow conditions, and is described as horseshoe shaped, crescent shaped, and groove shaped pitting corrosion.

The cooling water pipe adopts a wall thickness of 2mm and a diameter of φ 30mm thin walled steel pipe. The 3.5m thick cushion cap is vertically arranged with two layers of water pipe network, with a horizontal spacing of 1.0m and a vertical spacing of 1m. The distances from the upper layer network to the top surface of the cushion cap and from the lower layer network to the bottom surface of the cushion cap are both 1.25m; A layer of water pipe network is vertically arranged on the 2.5m thick cushion cap, and the water pipe network is vertically arranged in the center of the cushion cap; The vertical inlet and outlet of each layer of water pipes shall be staggered by 1.5m from each other. The water inlet and outlet shall lead out of the concrete surface for more than 1m. The water inlet and outlet of each layer of water pipe shall be staggered from each other, and the water inlet shall be equipped with a water valve for regulating flow and flow measuring equipment. The cooling water pipe connector adopts a hose connector.