High Quality Flat Aluminum Heat Pipe for Electric Device Cooling

The cooling water pipe adopts a wall thickness of 2mm and a diameter of φ 30mm thin walled steel pipe. The 3.5m thick cushion cap is vertically arranged with two layers of water pipe network, with a horizontal spacing of 1.0m and a vertical spacing of 1m. The distances from the upper layer network to the top surface of the cushion cap and from the lower layer network to the bottom surface of the cushion cap are both 1.25m; A layer of water pipe network is vertically arranged on the 2.5m thick cushion cap, and the water pipe network is vertically arranged in the center of the cushion cap; The vertical inlet and outlet of each layer of water pipes shall be staggered by 1.5m from each other. The water inlet and outlet shall lead out of the concrete surface for more than 1m. The water inlet and outlet of each layer of water pipe shall be staggered from each other, and the water inlet shall be equipped with a water valve for regulating flow and flow measuring equipment. The cooling water pipe connector adopts a hose connector.

Through manual assembly, the cooling pipe can be arbitrarily adjusted in length, nozzle diameter, size, and direction. It is characterized by beautiful appearance and color, large oil content, non-conductivity, corrosion resistance, and high temperature resistance.